Posts Tagged ‘glitter’

I Love to Create: Superhero Arm Warmers!

This T-shirt transformation project is my favorite of the accessories in my first book. They’re the Go-go Gauntlets (project #73) from Generation T: 108 Ways to Transform a T-shirt. They’re super easy to stitch up in an afternoon, and even easier to embellish with iron-on glitter sheets–which seriously increase the superhero factor.

These arm warmers are especially good for:
1) Completing late night deadlines (reports, papers, presentations, tax filing, etc.).
2) Healing goose-bumped flesh in the over-air-conditioned spaces of warm-weather climates.
3) Protecting long-armed folks from that pesky draft caused by the gap between the glove and sleeve in cold weather climates.
4) Shielding the knuckles of bicyclists from biting winds when they ride really fast.
5) Executing superhero power stances.

Materials:
-1 or more old T-shirts (with the bottom hem intact)
-Fabric marking tool
-Ruler
-All-purpose scissors
-Fabric scissors
-Needle and thread (or sewing machine)
–Tulip Fashion Glitter Shimmer Transfer Sheets
-Pressing cloth
-Iron

1. Measure the distance around the middle of your forearm (x). Mark a rectangle x” wide and between 11″ and 14″ tall that lines up along one of the side folds of the T-shirt and extends up from the bottom hem.

2. Use the fabric scissors to cut out the rectangle through both layers.

3. Cut open the side, along the fold of the shirt.

4. Fold each rectangle, right sides in, and make two marks along each of the open edges that measure 1 1/2″ and 3 1/2″ from the hem.

5. Stitch along the open edge, about 1/4″ from edge, leaving an opening (for the thumbs!) between the two marks.

6. Turn the arm warmers right side out and orient the thumb holes about one-third from the edge.

7. Use all-purpose scissors to cut out fun shapes from the iron-on glitter sheets (in pairs, if you want your arm warmers to match).

8. Keeping the arm warmers oriented as they were in Step 6, flip them over and arrange the glitter shapes near the hem. Peel away the shiny surface layer from the shapes, lay a pressing cloth over the arm warmers (being careful not to disturb the placement of the shapes), and press firmly with the iron for about 40 seconds. Repeat if necessary to set the glitter transfer.

9. Turn off and unplug the iron. Try on your new pair of superhero arm warmers!

10. Use all the shapes you cut out in Step 7 to make more!

Optional: Use remaining T-shirt scraps to make a matching superhero mask or headband!

[ Comments Off on I Love to Create: Superhero Arm Warmers! | Posted on July 26th, 2011 ]

I Love to Create: Sparkle Kitty Ears!

Clip-on cat ears for when you’re feeling a little bit feline! The occasion? Well, to be perfectly honest, I set out making these for my niece’s 5th birthday (she happens to love cats–her cat, Mo, in particular), but I didn’t finish them in time (despite the fact that they only take about 10-15 minutes to complete!). It turns out, though, that there was a higher power (called glitter) at work and the delay was well worth it: I recently got a delivery of Tulip’s new iron-on glitter sheets and I realized that the delay was meant to be (because what would these ears be without the sparkle?).

Save these for Halloween if you want, but why wait? I believe in wearing fun accessories whenever the mood strikes–because, hey, some days you just feel like a cat and here’s the perfect accessory to let you indulge that feeling. And talk about fun in the sun–these ears sure do sparkle!

Materials:
-Pen or pencil
-Scrap of paper
-Colorful felt
-All-purpose scissors
-Fabric scissors
-Metal snap barrettes
–Aleene’s Fabric Fusion fabric glue
–Tulip Fashion Glitter Shimmer Transfer Sheets
-Pressing cloth
-Iron

Make it:
1. Use the pen and paper to sketch out a slightly rounded triangle, about 2″ high. Add 1/2″ at the base of the triangle and then mirror the shape below it to create the template. Cut it out with the all-purpose scissors. (You can also fold the paper at the base after you’ve drawn the top triangle and the extended base, and cut around the shape through both layers.)

2. Fold over the felt and lay the template on top of the folded section. Use the fabric scissors to cut around the template, through both layers.

3. Mark and cut a second template, in the shape of a rounded triangle, about 1/4″ smaller on all sides than the original triangle in Step 1.

4. Select a color from the iron-on glitter sheets and trace the second template twice onto the shiny surface. Use the all-purpose scissors to cut them out. Peel away the shiny surface layer and arrange them on the felt ear pieces. Lay a pressing cloth over the ears, and press firmly with the iron for about 40 seconds. (Repeat if necessary to set the glitter transfer.)

5. Clip the metal barrettes in the center, on each side of each felt ear piece, so that the top of the barrette corresponds to the wrong side of the ear piece and vice versa. Generously apply fabric glue around the edge of the wrong side of the ear piece. (The felt absorbs a lot of the glue, so don’t be stingy!)