T-shirt Projects

The Rollover tank top (project #42 in Generation T: 108 Ways to Transform a T-shirt) is located on pages 110 and 111 and was cut and stitched from my well-worn lavender Keep Earth Alive: RECYCLE T-shirt. Congratulations to Kiki, who wins a signed copy of Generation T: Beyond Fashion for being the first of our finalists to email me all the correct info!

And congratulations to the rest of you, too! Your sweet runner-up prize is this T-shirt tutorial for that Rollover tank top.

Materials:

1 T-shirt

measuring tape

scissors

tailor’s chalk

straight pins

needle

thread

Make it:

1. Lay the T-shirt flat and cut a 8″-wide loop off the bottom of the shirt. Set it aside.

2. Measure and mark 12″ from the new bottom of the shirt. Cut horizontally across at that mark through both layers of fabric. Then snip through the side of the loop, creating a long rectangular strip.

3. Lay the strip flat and mark a length equal to your bust measurement (x) along the long edge of the rectangle. Cut vertically to remove the excess fabric.

4. Fold the rectangle in half lengthwise, right sides together. Pin along the short ends and sew the edge with a whipstitch.

5. Remove the pins. Turn the resulting 12″-high tube right side out and lay it flat. Turn the loop from step 1 inside out and center it above the 12″ tube so that its bottom (cut) edge meets the 12″ tube’s top edge.

6. From both sides of the 12″ tube, measure 2 1/2″ in and mark with the chalk. Pin the tubes together between the two marked points and sew along the pinned edge using a whipstitch. Remove the pins.

7. Flip the shirt over and repeat step 6 on the back.

8. Try on the shirt and roll the top tube over 4″ to 5″ so the right side of the fabric is facing out. Rollover is complete!

Variations:

This project is excerpted from Generation T: 108 Ways to Transform a T-shirt (Workman 2006).

Tags: Earth Day, holiday giveaway, Keep Earth Alive: Recycle, T-shirt tank top, Transform a T-shirt

[ Posted on April 24th, 2011 ]